Stop leaving your garage remote at home.
If you ride a motorcycle or bicycle, you know the drill: the remote is in your car, sitting on a shelf, or you just forgot it.
CycleKey mounts to your handlebar and stays with your bike.
WHAT IT IS: A compact, battery-powered garage door opener that clamps to your handlebar. The mount stays on the bike, and the remote slides off in one motion when you want it with you.
Stopping at the store and don't want to leave a garage remote on your bike?
Going for a walk and want to get back into your garage?
Slide it off, put it in your pocket, and slide it back on when you're home.
ONE REMOTE, TWO BUTTONS, SIX MODES: You pick the mode for your opener, and each button holds its own mode, so one remote can run two doors, even two different brands.
WORKS WITH: LiftMaster, Chamberlain, Craftsman, and Raynor openers with a yellow, purple, red/orange, or green Learn button - Genie and Overhead Door openers (Intellicode / Code Dodger) - Linear MegaCode openers and gate receivers (318 MHz)
FITS THESE BAR SIZES (shims included):
22 mm / 7/8" (standard Japanese bikes)
25.4 mm / 1.0"
28 mm / 1.10"
A flat 1 mm shim is included for sizes in between. Flush mount for tank or any flat surface.
PLEASE MEASURE YOUR BAR BEFORE ORDERING.
IN THE BOX: Remote with CR2032 battery installed, two-piece clamp with two screws (threadlocked), hex key, shim set, adhesive panel mount, and a printed setup guide. The panel mount uses 3M high-speed tape made for car exterior plastics. I recommend placing it on your triple tree (see photos), since it's metal and won't be damaged by the tape. Designed, 3D printed, and assembled in Northern California. 1-year warranty. Ships from Loomis, CA.
WILL NOT WORK WITH: Security+ 3.0 openers (white round Learn button, or a Bluetooth symbol on the opener). These use two-way Bluetooth and no radio remote can pair with them. It also won't work with older fixed-code openers that use DIP switches, or with Wayne Dalton, Stanley, Sommer, Marantec, or Ryobi. Not sure what you have? Message me a photo of your opener's label and Learn button and I'll tell you before you buy.
Stop leaving your garage remote at home.
If you ride a motorcycle or bicycle, you know the drill: the remote is in your car, sitting on a shelf, or you just forgot it.
CycleKey mounts to your handlebar and stays with your bike.
WHAT IT IS: A compact, battery-powered garage door opener that clamps to your handlebar. The mount stays on the bike, and the remote slides off in one motion when you want it with you.
Stopping at the store and don't want to leave a garage remote on your bike?
Going for a walk and want to get back into your garage?
Slide it off, put it in your pocket, and slide it back on when you're home.
ONE REMOTE, TWO BUTTONS, SIX MODES: You pick the mode for your opener, and each button holds its own mode, so one remote can run two doors, even two different brands.
WORKS WITH: LiftMaster, Chamberlain, Craftsman, and Raynor openers with a yellow, purple, red/orange, or green Learn button - Genie and Overhead Door openers (Intellicode / Code Dodger) - Linear MegaCode openers and gate receivers (318 MHz)
FITS THESE BAR SIZES (shims included):
22 mm / 7/8" (standard Japanese bikes)
25.4 mm / 1.0"
28 mm / 1.10"
A flat 1 mm shim is included for sizes in between. Flush mount for tank or any flat surface.
PLEASE MEASURE YOUR BAR BEFORE ORDERING.
IN THE BOX: Remote with CR2032 battery installed, two-piece clamp with two screws (threadlocked), hex key, shim set, adhesive panel mount, and a printed setup guide. The panel mount uses 3M high-speed tape made for car exterior plastics. I recommend placing it on your triple tree (see photos), since it's metal and won't be damaged by the tape. Designed, 3D printed, and assembled in Northern California. 1-year warranty. Ships from Loomis, CA.
WILL NOT WORK WITH: Security+ 3.0 openers (white round Learn button, or a Bluetooth symbol on the opener). These use two-way Bluetooth and no radio remote can pair with them. It also won't work with older fixed-code openers that use DIP switches, or with Wayne Dalton, Stanley, Sommer, Marantec, or Ryobi. Not sure what you have? Message me a photo of your opener's label and Learn button and I'll tell you before you buy.
